1 pre-out refers to the number of Pre-amplified outputs. You can use this output to drive Speaker / Subwoofer with an external Alpine power amplifier.

2 pre-outs refers to the number of Pre-amplified outputs. You can use this outputs to drive Speaker and Subwoofer with 2 external Alpine power amplifiers or one Multichannel amplifier..

3 pre-outs refers to the number of Pre-amplified outputs. You can use this outputs to drive Speaker and Subwoofer with 3 external Alpine power amplifiers or one Multichannel amplifier..

Head units with Dual in function can use their internal Amplifiers also when using a processor such as PXA-H510. In this configuration you can use the built in amps for effect and center speaker..

The 4 Volt Pre-out is incorporated in High-End CD-Tuner and Processor. This enormous output voltage on the Pre-out ensures low distortion and no noise influence on the way to the amplifiers..

.The SBS-0515 is driven by a Highpass filtered 35 Watts amplifier. Enough power for reproducing voices and center channel effects.

The 35 Watts of all 4 channels of the CVA-1000R are enough to drive the very sensitive Alpine SPS-Series or your Original equipped speakers, but for more output power you can use the 2 Pre-outs to drive an external amplifier - together with some SPR-Speaker..

The 40 Watts of all 4 channels of our Head Units are enough to drive the very sensitive Alpine SPS-Series or your Original equipped speakers, but for more output power you can use the Pre-outs to drive an external amplifier - together with some SPR-Speaker..

The 44 Watts of all 4 channels of the CTM-1503R ore others are enough to drive the Alpine SPR-Series. If this is not enough you can use the Pre-outs to drive an external amplifier - together with some SPR-Speaker - or just a Subwoofer..

The 55 Watts by 4 of the CTA-1505R are produced in the same way as in our external amplifier - by using a power supply to increase the voltage which is used for the internal amplifier..

The CDA- 7865R is the world’s first head unit to offer a 60W x 4 power amplifier. Until now, this much power caused unacceptable noise levels, but new Alpine technology has made it possible to offer high power with high sound quality. Only for the Subwoofer you should add a external amplifier..

A highly efficient DAC that prevents zero-cross distortion and provides excellent S/N ratio and dynamic range. Formerly used in the 5959 and now back again in the PXA-H600..

Like other single-bit DAC’s, this DAC eliminates zero-cross distortion and improves linearity. Unlike others, it uses an independent power supply that makes it more suitable for car audio, and provides firmer bass and greater spaciousness..

CD Shuttle Control. Head units with CD Shuttle Control give you easy in-dash command over the functions of a CD Shuttle installed in a remote location..

The Ai-NET system links high performance components via a high-speed bus, providing greater sound quality and control convenience, plus easier system upgrading..

BBE is a sophisticated technology that creates realistic sound fields with richly detailed sound that is remarkably free from distortion..

.If text has been encoded on a CD, the component can read and display the information, such as artist and title.

Amplifier with Crossover function allows you to set the cutoff frequency of your speakers. They can be used to filter the deep bass signals from your door speaker or Limit your Subwoofer to 50-150Hz..

Amplifier with independent Crossover function allows you to set the cutoff frequency of your speakers of each channel. They can be used to generate an active 2-Way speaker system without additional crossover..

The DC-DC technology is used in all Amplifiers except SBS-0515. This technology converts the 12Volt from the Car in a higher voltage to ensure output power up to 1500 Watts..

Alpine’s exclusive Digital Harmonics Enhancer analyses and optimises harmonic elements of the music for enhanced bass, better imaging and more distinct dynamics..

Dolby B-type noise reduction was developed in 1968 by Dolby Laboratories to address the hiss of slow-speed consumer tape-recording formats, such as compact cassette..

Introduced to the public in 1980, Dolby C-type provides 20 dB of noise reduction above about 1,000 Hz, fully doubling the amount given by B-type. Additional features were incorporated to deal specifically with the difficulties of recording on slow-speed consumer tape formats..

Dolby Digital is the newest movie sound format developed by Dolby Laboratories for consumer use. It provides six channels (called “5.1”) of sound: left, right, centre, left surround, right surround and a low-frequency channel for bass. With digital signal processing and fully independent channels, it delivers true stereo surround sound, better defined front sound, superior imaging and a wider sound field..

Dolby Surround, also known as Pro-logic is an analogue way to create a Multichannel signal from a stereo track. Many CD's are recorded in Dolby Surround and can be played back in combination with the PXA-H510..

DTS is an encode/decode process that delivers 5.1 channels of "master quality" audio on DVD. Each DTS encoded disc represents a sonic "clone" of the original film soundtrack..

Allows you to switch the button (and display) illumination between green (blue) and amber at the touch of a button..

Pressing a button releases the front panel so you can slip it conveniently into a pocket or handbag when you leave the car..

When the power is turned off,the entire front face retracts into the unit, leaving a blank panel. The perfect anti theft solution..

Connections conform to ISO standards, facilitating simple installation in European vehicles..

Alpine sets the standard for D/A converters with higher S/N ratio and wider dynamic range (both 105dB)..

Compact digital disc audio format..

MOSFET: Field Effect Transistors have a faster switching speed and less loss than standard components for highest possible output power..

Multi mode amplifier can be used in stereo + Mono configuration at the same time. You can connect Stereo Speaker and an additional Subwoofer..

Optical output allows the digital signal to be transmitted between components via fibre optic cable, maintaining absolute signal purity..

With a parametric EQ you can equalise your speakers to your needs at any frequency and at any level. Graphical Equaliser can be adjusted only at fixed Frequencies..

Together with DC-DC converter the "Pulse with modulation" ensure a stable Power output at any Battery Voltage.


The Radio Data system receives additional information from FM-Radio Stations such as Alternative Frequencies and Station names..

The unit is compatible with steering wheel remote control systems so it can replace the factory-installed head unit without loss of this convenient option..

.The unit comes supplied with a wireless remote control.

Wireless Remote Control Ready The unit accepts wireless remote controls (sold separately)..

You can connect these Amplifiers to Head units which have no Pre-Out such as Original equipped Radios.

Subwoofer level can be controlled from the head unit’s Control Centre as easily as the main volume..

The front panel swings down for access to the loading slot and can be set at any desired position..

Automatically mutes the audio when a phone call is received..

Allows several audio or video components to be connected directly to the head unit..










Ásco ehf - Asco electronics, Glerárgata 34b v/ Hvannavelli · 600 Akureyri, Ísland · Sími.: (+354) 461 1092 · Fax: (+354) 461 2091 · E-mail:asco@asco.is - Veftré